Expert set - system of flexing eyelashes ELAN "SUPERSONIC 2.0 PINK" (pink set)

The professional eyelash flexing kit "SUPERSONIC 2.0" consists of three products - Serum 1 PINK, Serum 2 and Serum 3 Multivitor.

Important! The "SUPERSONIC" expert system for eyebrow and eyelash flexing is designed exclusively for professional use!

Important! Serum 1, Serum 2 and Serum 3 Multivitor must be used in combination.

STAGES OF THE EYELASH FLEXING PROCEDURE

1) Diagnosis of the client's eyelash condition and determination of the exposure time of the flexing products according to the points specified below:

1st group: thick or straight eyelash hairs - exposure time 6-10 minutes for Serum 1 and at least 6 minutes for Serum 2;

2nd group: medium or thin eyelash hairs - exposure time 3-6 minutes for Serum 1 and at least 6 minutes for Serum 2;

The exposure time of Multivitor is 5 minutes for all groups of hairs.

IMPORTANT! The maximum exposure time of Serum 1 and Serum 2 is 15 minutes.

IMPORTANT! The activity of Serum 1 and Serum 2 directly depends on the air temperature in the room. The higher the temperature, the higher the reaction speed.

2) Preparation for the eyelash flexing procedure

1. Use ÉLAN DETOX-MOUSSE to degrease the hairs before the eyelash flexing procedure. Remove the foam with a cotton pad moistened with water.

2. Fix the silicone roller of the required size on the upper eyelid.

3. Distribute and fix the eyelashes on the roller with the fixing gel for eyelash lamination TM ÉLAN professional line and the applicator.

3) Forming the curl of the eyelashes (Serum 1)

1. Apply Serum 1 to the area of \u200b\u200bthe curl formation. The exposure time is 3-10 minutes.

IMPORTANT! The maximum exposure time should not exceed the exposure time for the selected group of hairs.

2. After the exposure time has elapsed, remove the remaining product with a dry brush in the direction of eyelash growth.

4) Fixing the direction of eyelashes (Serum 2)

1. Apply Serum 2 to the entire eyelash area in a thick layer. Exposure time is 6-10 minutes.

IMPORTANT! The exposure time at stage IV (Serum 2) should be equal to the exposure time at stage III of eyelash curl formation (Serum 1), but not less than 6 minutes.

2. After the exposure time has elapsed, remove the remaining product with a dry brush in the direction of eyelash growth.

5) Eyelash care (Multivitor)

1. Apply Multivitor to the entire eyelash area. Exposure time: 5 minutes.

2. After the exposure time has elapsed, remove the remaining product and fixing gel with a cotton pad moistened with water.

IMPORTANT! To achieve the most expressive effect and visible result, the technologists of the ÉLAN professional line brand recommend performing the eyelash dyeing procedure after completing the eyelash flexing procedure.

3. To complete the chemical reaction, including after eyelash dyeing, apply "ÉLAN DETOX-MOUSSE 2.0" to the eyelashes. Remove the foam with a cotton pad moistened with water.

4. Apply ÉLAN professional line COLOUR FIX 2.0 fluid-fixer for eyebrows and eyelashes to the eyelashes.

RECOMMENDATIONS AFTER THE EYELASH FLEXING PROCEDURE

! For 24 hours after the procedure, you should avoid visiting a bathhouse, sauna and solarium, and also avoid mechanically damaging the shape of the eyelash curl (sleeping face down in a pillow), minimize contact with water, and do not comb the eyelashes.

! For 48 hours after the procedure, avoid exposing your eyelashes to aggressive cosmetics and procedures (scrubs, peels, alcohol-containing lotions, laser procedures).

LIMITATIONS OF THE EYELASH FLEXING PROCEDURE

Absolute limitations to the eyelash flexing procedure: individual sensitivity to the components in the composition of the products, any damage to the skin in the eyebrow and eye area, redness, rash of any etiology, as well as visiting a solarium, laser and photo procedures 24 hours before the procedure.

PRECAUTIONS

Before use, it is necessary to perform an allergy test: apply 2 drops of each product to a small area of skin on the elbow 48 hours before use. If there is no redness, swelling or irritation on the skin, you can begin the flexing procedure.

Serum 1 contains thioglycolate. Serum 2 contains hydrogen peroxide. Products may cause an allergic reaction. Use protective gloves. Do not use metal objects when working with products. Avoid contact with eyes. In case of contact with eyes, rinse immediately with water. If an allergic reaction occurs, be sure to consult a dermatologist.

Composition: “SUPERSONIC 2.0” Serum 1 PINK: AQUA, THIOGLYCOLIC ACID, CYSTEAMINE HCL, CETEARYL ALCOHOL, AMMONIUM HYDROXIDE, ETHANOLAMINE, PROPYLENE GLYCOL, PARAFFINUM LIQUIDUM, ETHYLHEXYL STEARATE, PARFUM, CETRIMONIUM CHLORIDE, MICA, SODIUM ERYTHORBATE, CETEARETH-20, SODIUM SULFITE, DIAZOLIDINYL UREA, METHYLPARABEN, PROPYLPARABEN, DISODIUM EDTA, POLYQUATERNIUM-22, COLLAGEN, IODOPROPYNYL BUTYLCARBAMATE, HYDROLYZED KERATIN, TRIETHOXYCAPRYLYLSILANE, LAUROYL LYSINE, Cl 45410.

"SUPERSONIC 2.0" Serum 2: AQUA, CETYL ALCOHOL, GLYCERIN, CETEARYL ALCOHOL, HYDROGEN PEROXIDE, PARAFFINUM LIQUIDUM, CERATONIA SILIQUA (CAROB) SEED EXTRACT, HYDROLYZED SOY PROTEIN, HYDROLYZED COLLAGEN, POLYQUATERNIUM-7, POLYQUATERNIUM-16, ZEA MAYS (CORN) STARCH, ARGANIA SPINOSA KERNEL OIL, CETEARETH-33, TETRASODIUM EDTA, PHOSPHORIC ACID, SODIUM BENZOATE, BENZOIC ACID, PHENOXYETHANOL, POTASSIUM SORBATE.

"SUPERSONIC 2.0" Multivitor: AQUA, CETEARYL ALCOHOL, GLYCERIN, ISOPROPYL PALMITATE, PARAFFINUM LIQUIDUM, CYCLOPENTASILOXANE, BETAINE, HYDROLYZED WHEAT PROTEIN, HYDROLYZED SOY PROTEIN, CETEARETH-20, PEG-8, PEG-8/SMDI COPOLYMER, SODIUM POLYACRYLATE, CETRIMONIUM CHLORIDE, DIMETHICONOL, BHT, PALMITOYL MYRISTYL SERINATE, PHENOXYETHANOL, ETHYLHEXYLGLYCERIN, PARFUM, CITRIC ACID, BENZYL SALICYLATE, HYDROXYCITRONELLAL, Cl 60730.

Best before date: 24 months Shelf life after opening: 6 months